smok vape atomizer nord coils rpm80 mod trinity nfix kit review

I got a vapeciga smok nord coils health cabins for the purposes of this review.

Smok g priv 3 colors:

– PRISM chromium

– Black

– crimson

– Gold Prism

Smok g-nested 3 mod specification

– Size: 54 x 28 x 85mm

– Chip: IQ-G Chipset

– Operating mode: VW (Soft Norm, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I

– Power range: 1W-230W (VW) / 10-230W (TC)

– Input voltage: 6.4V-8.4V

– Output voltage: 0.5V-8.2V

– Battery: two 18650 cells

– Cooking time: 0.001s

– Ports of loading: Type C

– Charging voltage: 5V

– Charging Current: 2.0A

– Standby current: <400uA

– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)

– temperature: 200 ° F-600 ° F / 100 ° C-315 ° C

– Display: 2.4 inch touch screen

Smok tfv16 tanks lite specifications:

– Size: 24 x 58.5mm

– Capacity: 5ml

– Filling: Refill Top System

– Material: Stainless steel

– Coils: Mesh TFV16 conical Lite Coil, Best: 60-75W; TFV16 Lite Mesh dual coil 0.15ohm, Best: 60-90W

– Topic: 510 gold plated wire

Vapeciga smok rpm80 pro replacement pods lite 16 is 24 mm in diameter and 58.5mm high this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and you will receive a two coils.

the atomizer construction quality is good, the wire is smooth and everything is as it should be. Above you can see Atomizer “Smok” and atomizer background you can see the “Designed by Smok”.

With the atomizer, you will Smok drop by drop and the standard spray nozzle pre-installed is not compatible with the 510 or 810 droplets advice that would be a con for some people. The drip is acceptable to use in my opinion.

This is the atomizer on the load and atomizer You can see the buttons you need to press to push the top cover. So when you press a button, you can push the envelope and see the fill hole. Fill a large hole and you will not have a problem to fill the tank. There are no leaks when filling the tank.

This sprayer tank is equipped with glass bubbles preinstalled and bubbles package, you will receive a replacement glass tank. glass tank capacity with a capacity of 5 ml bubble really good in my opinion. If you want, you can buy it in the 2ml atomizer release. I really liked the glass bubble and I like the ability.

With the atomizer, you will receive two coils. A coil is pre-installed and the other is in the box. Integrated coil is tfv16 Lite mesh coil and the coil cone works best from 60-75w, the coil resistance is 0.2ohm. Coils that you will receive in the package is a double tfv16 Lite mesh coil and it has the best endurance and 0.15ohm work 60-90w. You can really easily replace the atomizer coil, you need to is to get out of the coil and a pulse in another, very simple and easy. In the coil, you can see the engraved lines so you can know when to fill the tank which is nice. The first time you use the coil you need to start with a few drops of liquid E and you can put a coil in the tank and fill the tank.

In the control dial airflow, you can see that the air flow both places. In the control dial airflow, you can see some details that help adjusting airflow and what part will be adjusted, will be the same on the other. You can easily adjust the airflow into the atomizer.

How does it work? Atomizer and my mind:

Atomizer build quiality I received was very good, everything worked fine and the correct cable. With the atomizer, you receive two rollers and two glass bubble tanks were really good in my opinion. Show new smok mag mod also receive a standard preinstalled drops and the spray nozzle is not compatible with the advice 510 or 810 drops would be an idiot. Top filling out this well and have not had any problems, fills a big gap and can fill up quickly and easily. Capacity is very good in my opinion and I believe that many will 5ml capacity. Using spray, you receive two rolls, a single coil and other networks are dual coil threads. I tried a mesh coil and decent work, good taste, but I like the tank coil Tf better, and also gives a good flavor and excellent vapor production, this very strong vapor. Given all a very busy spray that can be treated.

Drawbacks:

– It is compatible with the 510 or 810 drip tips

Pro:

– The build quality is good

– facilitate filling system

– capacity of 5 ml

– Two glass bubbles tank

– Two coils

– The good taste

– dense vapor and steam production

– Easy to replace the coil

– Easy to adjust the airflow

Smok g priv 3 mod:

Smok g priv mod 3 that feeds two 18650 and objects of this mod 1-230w formed. Mod dimensions are 54 mm x 28 mm x 85 mm. mod construction quality is very good and there were no complaints. I really like the design of a mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod has no sharp edges and mod is very convenient to use. You can also see some details about the mod, mod at the front, you can see the “Smok” and behind the mod, you can see “G-3 PRIV” with a little information.

On the upper side of the mod, you can see the connection thread here is good and I have no problem, silver and gold spring pins. This mod, can be used up to 25 mm diameter without false atomizers.

On the smok trinity alpha coils click in of the mod, you can see the battery cover and, as said this device is powered by two batteries 18650. The remains of the battery cover in place because the magnet and remains well in instead there is nothing to play which is very good. At the bottom of the deck, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the orientation of the battery inside painted and we also have here the band so you can make the easiest battery. When the battery is put into the mod and mod when no very good sizzle stirring.

Sub mod can see the ventilation holes and USB port c.

You can use the USB port for software updates and can be used to recharge the batteries for this auxiliary device load balanced. As always, I recommend charging your batteries in an external charger.

On one side of the mod, you can see the shutter button. shutter button on the device is really big and dislocation, it works very well. I like the shutter button and in my opinion is very comfortable to use. Above the shutter button, you can see another button is used to turn on / off the screen and lock / unlock the screen.

On the front you can see the mod touch screen that really, really big screen, the screen size is 2.4inch. I think this is a beautiful screen and the screen brightness is good.

To activate it you must click 5 times the shutter button and should do the same to turn it off. When the power supply mode is activated will appear on the screen:

– I can not

– locking / unlocking

– The battery indicator

– Preheat

– W

– Time puff

– Left and right

– coil resistance

– V

– against blow

Thus, on the screen, we have all the necessary information and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and have not had any problems so far.

In the enter the menu, you can see:

– Modus

– My style

– hojaldre

– Setting

When a mode is selected in which you can see:

– Vw

Preheat: soft, standards, strong, max

watt

– Tc

Ingredients: o, ti, ss

TCR

Preheat

If you choose me mode, you can set 4 different operating modes, you can select a rule, preheating of the liquid and can be written using and NIC.

Choosing puff puff, you can reset the counter and can set the maximum drag.

If you choose the settings you can see:

– General (approximately factory reset, accessibility, food)

– Chip (Info)

– Theme (you can choose the timeout color and screen)

– Access code

How do these devices work and my thoughts:

G 3 PRIV is my opinion that another mod is very nice with smok nfix kit get code. mod build quality is very good and everything is as it should be, feels very solid in the hand model. Mod has no sharp edges and convenient to use in my opinion. I like the shutter button and in my opinion the shutter button is very convenient to use, runs smoothly for now. This mod, can be used up to 25 mm diameter without false atomizers. This mod is a fingerprint magnet will be a disadvantage for some people. Mod USB port and supports c balances the charge that many would like, but as always, I recommend using an external charger. The screen here is very good, is the size of the display of 2.4-inch touch screen and works very well, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have an access code and can choose the color on the screen.

Above the shutter button, there is a button that is used to lock / unlock the screen and enable / disable screen. The battery cover is still perfectly in place and there was no play here, which is very good.

Mod now fine and had no problems with this mod.

I really like this mod and mod works mostly without any problems so far, so I can recommend this mod if you want to buy a mod touch screen.

Drawbacks:

– fingerprint magnet

Pro:

– The quality of good building mod

– I like mod design

– comfortable to use

– button located above the shutter button

– I like the shutter button

– touch screen HD 2.4 inch

– Good display brightness

– Lots of information on the screen

– Easy to use

– Touch screen works well

– You can change the colors on the screen

– balanced load

– Battey cover keeps perfectly in place

– My selection method

– Access code

– No ring

– tape so you can easily remove the battery more

You can buy here: smok vape atomizer  https://www.vapeciga.com/collections/smok

sourcemore thanks

Comment about smok vape nord 2 RPM80 Pro mag trinity alpha Nfix Kit 25W

Vapeciga smok nord 2 water resistant, shock, 18650 mod with TFV9 tank. Let deepen this comment Smok SCAR-18 and TFV9 and more.

TFV9 coil storage tank is good research. While SCAR-18 battery is powered by dual 18,650 and driven by IQ-X chipset. Also IP67 water and dust resistant, and also according to Smok shock. Another feature Smok TFV9 capacity of 6.5 ml of e-liquid and a new look. But it is Smok SCAR-18 and TFV9 without any problems? Let’s take a close look at the reviews Smok SCAR-18 and TFV9.

The contents of the box
Here is a brief summary of what you can expect to see included with Smok SCAR-18 and TFV9 kit.

Smok SCAR-18
1x Smok SCAR-18 Mod
Smok TFV9 1x 6.5 ml (2 ml TPD)
Maille V9 2x 0.15Ω Coils
1x Replacement of glass bubbles (TPD hetero)
1x Micro USB Type B
1x user manual
packaging
Typical packaging laminate Smok forward with a choice of colors for photo SCAR Smok-18 and TFV9. In addition to the characteristics of the contents of the case, the main characteristics and authenticity Auditor. While health warning function returns to normal.

Then remove the lid, revealing manual and SCAR-18 mod Smok creature in a plastic inlay. Also under the embedding sit Smok V9 TFV9 with tight coil for water pre-installed. While the coil, glass, and replacement USB cable to sit together.

Then remove the lid, revealing manual and SCAR-18 mod Smok creature in a plastic inlay. Also under the embedding sit Smok V9 TFV9 with tight coil for water pre-installed. While the coil, glass, and replacement USB cable to sit together.

Similar to the show new RPM80 Pro is not present in the front edge of the plastic fairing. Furthermore, the design is very neat and key sounds are both sensitive and well positioned for easy use. In addition, the design of the LCD screen is nice and clean. But people with impaired vision may have difficulty with smaller readings. However, none of the usual color theme options to divert attention from the arrangement, which is great to see.

Photos of the battery compartment door on the scar-18
While the major method SCAR-P5 Smok lock with the launch of push and close the door with ease. But Smok SCAR-18 only bring fit without the battery inserted. In addition, after the battery in the SCAR-18, the battery door was very difficult to close. What is important is that there is no blow to the appropriate battery. Maybe I was not possible with the review sample, we will wait.

510 connector
Smok 510 connector Figure SCAR-18
No doubt SCAR Smok-18 28mm TFV9 right place. But it is also home to 30 mm tank without spilling. The important thing 510 Pine center offers a good level of rigidity. Although both smooth and soft wire cutters. This gives confidence in the long-term use. In addition, the center pin seemed to throw around 2-3 mm, which is good to see.

smok TFV9
Smok TFV9 photo Network
Every first embarrassing red coat on Smok TFV9 not near as mod, and visually very visible. Also, if you do not have a care to close the lid, thinners and varnishes may be removed entirely.

The important thing is that there are two different dimensions to smok mag click in. In addition to the standard version has a diameter of 28 mm and a height of 56 mm. While the release TPD has a diameter of 25.5 mm and high 50 mm.

In addition to the strength of the SCAR-18 is to use 5 Click the shutter button. Furthermore, the 3-click mode is vape with the breath counter at the end of the selection. For now, the fire and the same time Watts lock release button. But for those who want to change the color of the screen, hold down the shutter button and up.

VW – Watt Variable
Watts set may be limited to allow fine adjustment of the vaporizer experience. Especially with Smok SCAR-18 and control buttons allow the addition of 1W adjustment. Perfect for the coil output power good balance and personal preferences.

Ni TC / TC Ti / SS
After the metal coil helix been to adjust the temperature around the top and bottom buttons. However coils ohm (Ω) rating, strength and TCR values ​​can be adjusted by clicking the shutter button three times. Followed by pressing the shutter button to move to the desired option and then use the up and down arrow keys to adjust.

Due to high design lift and turn the cap. Vapeciga smok trinity alpha not only fast and easy filling. But simply lifting method on / lock pressing the cap it should not be canceled by the movement. Of course, this is a great improvement over the TFV8. But to start with a silicon gasket is a little too tight makes opening and closing rigid. However, it only lasted a few minutes, and then deposited in investment.

Eraser
Photos airflow Smok TFV9
Interestingly TFV9 fully customizable not so loud in the air flow as other aluminum coils tank integrated into the market. Moreover, in addition to smooth ring moves air flow control position, the remnants of a smooth vape without turmoil.

spool replacement
Photo Smok coil replacement TFV9
A replacement of one coil on coil TFV9 Smok storage tanks should be an easy case. But it suffers from some of the original TFV8 problems. In addition, the coils can be tied too good for the fireplace and outside the glass needs. allowing a better grip, but the reel apart. Therefore, the coil TFV9 not be replaced while there and the remaining liquid.

But replacing and priming of the coil is a case of taking the old rolls. In addition to selecting a new coil with a few drops of e-liquid in the fireplace and a roll each drill hole. screw spindle near TFV9, and filler. The important thing is let stand for 10-15 minutes to saturate the coil.

While get code SMOK Nfix Kit 25W has the IQ-X chipset players experience vaporizer. In addition to IQ-X offers the following levels of protection.

low battery (voltage protection) – the battery block-level has dropped to the point of no return.
Ohm too low – cut Security.
Ohm is too high – security court.
BRIEF atomize – cutting, coil can be blown.
PCBA too hot – high temperature protection, better protection of the electronic card and battery.
Timeout 8s – Protects against accidental firing continued.
Although there is no specific protection for USB. However, it would be reasonable to assume that there is some level of protection.

specification
Smok SCAR-18 Specification 54 * 30.6 * 88mm
Dimensions 30.6mm (W) x 54mm (D) x 88mm (T)
The power output range of 1W – 230W (VW) / 10 – 230W (TC)
an output voltage of 0.5 – 8.0V (not selected)
2x battery type and quantity of 18650
Mod frame material – zinc alloy, a layer of rubber?
0.10- 2.50Ω resistance range (VW) / 0.05 – 2.00Ω (TC)
Temperature range 100 ℃ – 315 ℃ / 200 ℉ – 600 ℉
Weight 183.5g
Smok specification TFV9
6.5 ml dimensions of 28 mm (diameter) x 56 mm (height)
Dimensions (TPD) 25.5 mm (diameter) x 50 mm (height)
wood stainless steel, silicone seals.
Weight 62 g / 65 g (TPD)
but S
Smok clear SCAR-18 and TFV9 both had a little niggle with everyone. Furthermore TFV9 suffer coil becomes difficult to remove during the roll change. Furthermore TFV9 suffering from intermittent flooding and leakage V9 mesh coil after coil received more than 250 inhalation. The important thing stiffness close the battery compartment of Smok-18 SCAR uncomfortable. However, this can only ask SCAR-18 that I received for review.

You can buy here: smok vape https://www.vapeciga.com/collections/smok

sourcemore thanks