How to open and replace vape liquid

If you have purchased an electronic cigarette (VAPE) and the liquid cap does not open when you try to use it, or if you want to try another liquid but do not know how to replace or replace it, how to open the liquid cap and how to replace it. We will also introduce detailed preventive measures and types of electronic cigarettes (VAPE) that can be used easily and conveniently, so please take a look at this article and enjoy electronic cigarettes (VAPE).

Open the vape liquid correctly

Have you ever been interested in electronic cigarettes (VAPE) and bought it, but you don’t know how to open or replace it, and have trouble adding or replacing liquids? For people who cannot open the liquid cover or do not know how to replace the liquid cover, here are step-by-step instructions. Be sure to make full use of electronic cigarettes (VAPE) and enjoy the fashionable life of VAPE.

About child lock
The liquid lid of the electronic cigarette (VAPE) has a child lock. Liquid is a chemical substance, with spices added to food additives and vegetable glycerin. Some liquids manufactured and sold in Japan do not contain nicotine tar, but some liquids ordered from abroad do contain nicotine. It is said that electronic cigarettes (VAPE) are safer than cigarettes, but if your child accidentally drinks electronic cigarettes, it may cause trouble. This is why there is a child lock on the liquid cap. This can prevent the lid from opening easily if your child does evil. Even if you rotate the cap like a normal bottle, it will only spin idly. Therefore, many people mistake it for “not open”.

Basic opening and closing
The liquid has a child lock, so even if you turn the cap as it is, the top of the cap and the bottle will not engage and will rotate freely. Therefore, in order to open the liquid correctly, it is necessary to turn the cap while pressing the cap against the bottle. Just like opening a PET bottle cap, turning it counterclockwise can open it smoothly.

You can close the lid without pushing it open. Rotate clockwise. After closing the lid, turn the lid counterclockwise instead of pressing it to ensure that the child lock is in place.

Correctly replace the electronic cigarette (VAPE) liquid (add, replace)
The process of replacing the liquid is “Atomizer cleaning -> Drying -> Liquid injection”. Once you remember it, it’s not that difficult, but there are a few things to remember. Check the program carefully, then add and replace the liquid correctly.

Atomizer cleaning
The only cleanable part of an electronic cigarette (VAPE) is the atomizer. The atomizer is a combination of a liquid storage tank and a coil unit, and the quilt is wrapped inside the coil unit. There are three cleaning methods: “water or warm water”, “absolute ethanol” and “ultrasonic cleaner”, but this time we will introduce the simplest “water or hot water” cleaning method.

Disassemble the atomizer, remove the coil unit at the same time, and clean it with water or warm water. If there is the last used liquid in the liquid tank or coil unit, the taste and smell will mix together, so please wash it thoroughly. Especially cotton cloth is soaked in liquid and needs to be washed thoroughly.

Since there are many small parts, you can put the disassembled parts in a colander for safe cleaning to prevent loss. However, some liquid storage tanks are made of glass, so be careful not to break them. If it is very dirty, please wash it with a neutral detergent, then rinse it thoroughly, or immerse it in water or hot water. You can also disinfect by boiling, so you can keep the atomizer clean once a month.

However, be careful not to get the main body (battery) part wet. Since many products other than atomizers are not waterproof, they may cause problems after cleaning. After disassembling the electronic cigarette (VAPE), you can only take the atomizer into the sink, etc.

dry
Drying is an important procedure to prevent water damage. When disassembling, place it on absorbent materials (such as kitchen paper) to dry for half a day to a day. But before that, please wipe the water in the gap with a paper towel or cotton swab. In particular, if the cotton is damp, it will not emit smoke, and when you breathe in the cotton, hot liquid will be ejected. Let’s do it well.

Liquid injection
Once dry, finally pour the liquid into a storage tank. There are two types of liquid storage tanks, one for placing liquid from the top and the other for placing liquid from the bottom. Make sure you know the electronic cigarette (VAPE) you are using and pour it in carefully so that it does not fall into the middle hole.

At this time, if you put too much liquid, the liquid will leak from the mouthpiece, so put half to 70% of the liquid in the liquid tank as a guide. Leave it for 10 to 15 minutes after injection, and soak the cotton cloth in the liquid before use. Insufficient immersion will cause air burning and shorten the coil life.

By carefully washing and drying in this way, it is possible to enjoy the liquid by exchanging (replacing, replenishing) the liquid without mixing the taste and smell. After filling the liquid, you only need to assemble it, but please be careful not to tighten it too tightly during this process. It may damage the threads and may be difficult to remove the next time you try to clean. One of the keys to long-term use of electronic cigarettes (VAPE) is to use moderate force.

POD type vape is convenient for busy business people!

POD type VAPE has been sold in recent years. Prior to this, most electronic cigarettes (VAPE) were PEN and BOX types. The POD type can be used only by replacing the entire ink cartridge containing the liquid or the coil, without the maintenance required when using the PEN type and the BOX type, such as cleaning and liquid injection labor. Because of this ease of use, VAPE has now become the mainstream in foreign countries.

This is in POD type VAPE (Bape), a My Blu-ray TM (My Blue), the official website and, Tokyo, Osaka, Fukuoka, Hokkaido, Aichi, Saitama, Kanagawa, such as easy goods corners You can buy it at some convenience stores in Ye. In addition, it is expected that the sales area will be expanded nationwide in the future and will be more easily available. As mentioned above, the POD type VAPE mybluTM has a coil and a liquid built into the seasoning box, so it can be maintained without removing the coil. Simply insert the seasoning box to complete the liquid replacement and maintenance. Electronic cigarettes (VAPE) are very suitable for business people who are busy at work. One of the characteristics is that there are more than ten exclusive flavors. It is easy to obtain and use, and a starter kit with all the essentials is on sale, so if you want to enjoy VAPE more easily and easily, why not try it? is not it.

So far, we have introduced how to open and replace PEN and BOX liquids. For those who have difficulty maintaining, there is also an easy-to-use POD-type electronic cigarette (VAPE). From beginners to advanced users, please choose the type that suits your taste and enjoy electronic cigarettes (VAPE).

Leave a Reply

Your email address will not be published. Required fields are marked *