This review of relx devic vape and artisan herbva pro nokiva vaper

Today I took a look at the latest series herbva pro sent for review by Sourcemore. PAL popular series in 2019 thanks in part to its design “tocho box baby,” I have both the original PAL and PAL II Pro, so I’m happy to see if version 18650, which is more like a box of tickets will put a decent level.

The herbva nokiva equipped with the outdoor shows a sleeve device in the selected color on the front, and a table of contents, and the identification code on the back. Currently, only two colors: “nest of black bee” which is what I have here, and “curse of the rainbow” (red). Inside, you will find a box with only arteries fairly simple logo, the fingers broken cover to facilitate access and instruction booklets reveals elevator, where the rest of the kit is is arranged in a layer.

PAL18650 IP support rollers, first seen in arteries and AIO coils to the previous version of the HP PAL airistech. different sizes of coils and two different rooms AFC provided in the box. This package includes an IP mesh coil 0.4ohm artisan vaper direct lungs is limited, and round wire coil HP lungs mouth experience. Several other HP coils provided so that if you have a favorite from earlier versions also work here more a part RBA is also available as a separate purchase.The device itself is protected on the sleeves and the plastic panel also has a protective screen cover their models to better protect the finish during transport. USB-c and the second coil with basic afc in a small bag with a wide range of spare parts O-ring.

specification:

The size of 89 mm x 45 mm x 23.5 mm
Mag construction
PCTG reservoir 3 ml (2 ml for TPD)
only 18650
Amp charging through the USB 1.5-c
output 5 to 60 watts
Resistance is between 0.3 and 2.0 ohms

PAL18650 may seem a little more like PAL PAL II Pro as the original and surprisingly no more than 1000mAh removable battery is 18650. internal displacement is still pretty soft, and aluminum alloy and polycarbonate support structure.

If you wonder why some odd angles in the picture, when the side panel is finished in a mirror, so that can be used almost like a shaving mirror! catch them in the right light and if you really pop. Unfortunately, not much movement in the two panels form a disturbing crackling sound, so if you are the type that are mixed with things that can be pushed to the wall in a short period of time. High-gloss finish, which also has a bit of a fingerprint magnet.

Under the side panel is button battery tray with the spring pin at the top, the battery signal could be clearer here, but there is at least one band to aid in removing the battery. On the opposite side is the vehicle itself with small buttons and screen up / down. The screen is exactly the same as that found in the PAL II Pro if you are a little older like me a drink, then reading is a necessity here, I am pleased to report that the noise disturbing PWM Pro is not as seen today, but it seems that all the new card, insert the battery also means that 18,650 are now able to deliver 60 watts is also adjustable from 5 to 60 watts in stages from 0 to 5 watts.
Insert and remove the pods may be easier, unlike similar systems in which to place the capsule at first base in the corner here, you should have lined up around the square, which makes me a bit worried by force pin long term perspective, this small decreases with chamfered edges on the basis of air flowing therethrough.

outer edge device sufficient flow of air and vacuum side of the USB-C port and end 510 is compatible with earlier drops. There is a USB port backlight to display the approximate capacity battery LED, but it is very small, almost invisible, whether using 0.96amps PAL18650 freight on board with whatever is fresh and fun required. I’m happy to go with the standard 510 airistech because I found a sophisticated drip that includes just a bit too short to be practical. I think the style is also very useful kit right or left so that he could be perfect for everyone out there and hand over the power button is perfectly positioned in each hand.

gondola itself uses a standard platform / coil / afc assembly, but here is the basic design of the nacelle afc stimulation screw fit. JTMPs means construction must be resistant to most liquids and has a capacity of 3 ml (2 ml for Local PDT). Under low port enough padding on the boat that seems contradictory, but arteries rich of events are device plane works very well in practice and media design keyhole does not suffer pockets disturbance of air during good filling .

ery

PAL18650 IP support rollers, first seen in arteries and AIO coils to the previous version of the HP PAL airistech. different sizes of coils and two different rooms AFC provided in the box. This package includes an IP mesh coil 0.4ohm artisan vaper direct lungs is limited, and round wire coil HP lungs mouth experience. Several other HP coils provided so that if you have a favorite from earlier versions also work here more a part RBA is also available as a separate purchase.

I do not use IP coil before, so I am very happy to try it, which is estimated at 20 28watts, but it looks a bit better than the 30 watts private. decent taste, as you can expect with a mesh coil, and do not think you will be satisfied with its performance. And a minimum of condensation in the tank too. Reel HP also performed well, although my choice would mesh coils 0.6ohm in this application.

Pro:

18650
60 watts output
Good variety of coils

disadvantages:

the movement of the panel
small screen

Conclusion:

If you are a fan of the arteries of the PAL series before, but always hope you have a battery that is a bit more then there is much to recommend here with the introduction of the 18650 version with no increase in size a lot. panel setting could be better, but I’m very difficult at this time because it seemed the worst, so if you are in the market for a budget box ingot-shaped device, you could do much worse ,  especially with relx vape current price is $ 21.47,

So my friend arteries also built the device, camera quality is excellent and is made of zinc alloy. I like the design of this device and the device is very good in the hand. With this device, you receive a lanyard that many would like and also with this device, you receive two cartridges with different coils in Nice.
Funnel convenient to use. You can fill the cartridge with ease and without any problems with the gorillas bottle. 2 ml cartridge capacity is excellent capacity for small devices. One can choose between two coils, one coil has a resistance of 1 ohm resistance and other 1.4ohm. This device has a shutter button that can be used and can use the pull switch is activated, which is very good. the battery has a capacity of 700 mAh more than good for small devices and also can charge the battery very quickly as a 1A load bearing.
Device loose a little air flow, air flow MTL do not pull tight, loose mtl interesting and I want a better flow of air tight. taste good, I am satisfied with the taste here, was also shot in the throat. shutter button is active in the plant and pull swith is fine and had no problems here, but I want to use the shutter button to mtl air flow coward. I like the battery indicator because I know how much battery is left. The device works in output mode and that a person would like to do and this device works up to 20 W when the battery is fully charged. I like what they do on top of the machine, because I could see the liquid in the cartridge is a very good mail.
Therefore, the design of this device is very good, the build quality is excellent and I like almost everything here, so I recommend this unit if you like mtl vaping loose.

weakness:

  • Drawing tight

Pro:

  • I love design
  • Good build quality
  • Easy to use voice
  • It is always good in the hand
  • easy to fill
  • 2 ml capacity
  • You can see eLiquid
  • Two cartridges in the package
  • Drawing activated switch
  • shutter button
  • The battery indicator
  • c Usb
  • The good taste
  • 700mAh
  • longe

Accept a gift of heaven

You can be purchased here: relx device

Leave a Reply

Your email address will not be published. Required fields are marked *